Руководство По Установке для Cisco DNCS System Release 2.7 3.7 4.2
Chapter 5 SR 7.0 Post Upgrade Procedures
68
OL-31613-01
Set the Clock on the TED (Optional)
Complete these steps to set the clock on the TED:
1 In a root remote terminal window, type
1 In a root remote terminal window, type
date
and press Enter. The system date
and time appear.
2
Write down the system date and time in the space provided.
System Date: _________________________
System Time: _________________________
System Date: _________________________
System Time: _________________________
3 What type of TED is installed at the site you are upgrading?
If it is a TED-FX, type the following command and press Enter:
rsh –l root dncsted
If it is a TED-3 or TED-4, type the following command and press Enter:
ssh –l root dncsted
Note: The "l" is a lowercase L in each instance.
4
Type the root password and press Enter. You are logged on to the TED as root
user.
user.
5 Type
date
and press Enter. The TED date and time appear.
6 Compare the time results from step 1 with step 5. Do the date, time, and
timezone on the DNCS and TED match?
If yes, go to step 9.
If no, go to step 7.
7 At the prompt, type
date [mmddhhmm]
and press Enter.
Example:
date 07132316
Notes:
The format for the date command is:
– mm-month
– dd-day
– hh-hours in 24 hour format
– mm-minutes
– mm-month
– dd-day
– hh-hours in 24 hour format
– mm-minutes
The command can be modified to include the year, the seconds, or both the
year and seconds.
year and seconds.
Examples:
The date 073123162001 includes the year.
The date 07132316.30 includes the seconds.
The date 071323162001.30 includes the year and seconds.
8 Type
date
again and press Enter. Verify that the correct time now appears.