Руководство По Установке для Cisco DNCS System Release 2.7 3.7 4.2

 

70 

OL-31613-01 

In this procedure, you will check to ensure that all third party BFS application 
cabinet data is present following the upgrade. 

Note: You will need the sheet of paper that you used to record third-party BFS 
application cabinet data when you completed Record Third Party BFS Application 
Cabinet Data. 
1  From the EC WUI, click Application Interface Modules > BFS Client. The Site 

DNCS Broadcast File Server List window opens. 

Refer to the sheet of paper that you used when you completed Record Third 
Party BFS Application Cabinet Data. Are there any third-party BFS application 
cabinets that were present before the upgrade and are now missing after the 
upgrade? 



 

If yes, create a cabinet for each of the missing third-party applications using 
the Broadcast File Server List window that is already open. 
a  Click Add Server. The Add Server window opens. 
b  Click the arrow next to the Server Name field and select the appropriate 

server. 

c  Click to highlight the correct Mode (1-way or 2-way). 
d  Click to highlight the appropriate Available Source. Then click Add to 

move it to the Selected Sources column. 

e  Click Save. 
f  Repeat steps a through e for any additional third party BFS application 

cabinets that are missing. 



 

If no (there are no missing third-party BFS application cabinets), continue 
with step 4. 

3  Highlight each of the third-party application cabinets listed on the sheet of 

paper, in turn, and click Edit. The Set Up Server window opens for the selected 
cabinet. 

4  Examine the Mode field for the selected cabinet and verify that the correct mode 

(1-way or 2-way) is checked. 

5  Verify that the correct Selected Sources are present for the selected cabinet. 
6 

Click Cancel to close the Site DNCS Broadcast File Server List window when you 
are finished.