Технические ссылки для Cisco DNCS System Release 2.7 3.7 4.2
2
4011319 Rev C
Overview
System Release Requirement
This document applies to System Releases (SR) 2.5, SR 2.7, SR 3.5, SR 3.7, SR 4.0,
SR 4.2, and SR CV 3.4.
SR 4.2, and SR CV 3.4.
Prerequisite
The recommendations described in this document assume that you use an 8-VSB
receiver capable of providing a compliant multi-program transport stream
(MPTS).
receiver capable of providing a compliant multi-program transport stream
(MPTS).
Important: Before you begin, you must contact Cisco Services to have the DNCS
"Third-Party Source" feature support enabled on your system. You must do this
to complete the procedure called Setting Up Non-Cisco Digital Sources (on page
7).
"Third-Party Source" feature support enabled on your system. You must do this
to complete the procedure called Setting Up Non-Cisco Digital Sources (on page
7).
Document Version
This is the third formal release of this guide. This document contains minor text
and graphic changes, and is written for systems running SR 2.5, SR 2.7, SR 3.5, SR
3.7, SR 4.0, SR 4.2, and SR CV 3.4.
and graphic changes, and is written for systems running SR 2.5, SR 2.7, SR 3.5, SR
3.7, SR 4.0, SR 4.2, and SR CV 3.4.
Important: An earlier technical bulletin, Program and System Information Protocol
Configuration (part number 4007581, published June 2004), provides PSIP
configuration instructions for systems running SR 2.2.
Configuration (part number 4007581, published June 2004), provides PSIP
configuration instructions for systems running SR 2.2.
In This Document
Configure Unencrypted Transport Streams ........................................................... 5