Информация о лицензировании для Cisco Cisco StadiumVision Mobile Streamer
* - 2001/10/23 Chad N. Tindel :
* - No longer set the MAC address of the master. The bond device will
* take care of this itself
* - Try the SIOC*** versions of the bonding ioctls before using the
* old versions
* - 2002/02/18 Erik Habbinga :
* - ifr2.ifr_flags was not initialized in the hwaddr_notset case,
* SIOCGIFFLAGS now called before hwaddr_notset test
*
* - 2002/10/31 Tony Cureington :
* - If the master does not have a hardware address when the first
slave
* is enslaved, the master is assigned the hardware address of that
* slave - there is a comment in bonding.c stating "ifenslave takes
* care of this now." This corrects the problem of slaves having
* different hardware addresses in active-backup mode when
* multiple interfaces are specified on a single ifenslave command
* (ifenslave bond0 eth0 eth1).
*
* - 2003/03/18 - Tsippy Mendelson and
* Shmulik Hen
* - Moved setting the slave\xd5 s mac address and openning it, from
* the application to the driver. This enables support of modes
* that need to use the unique mac address of each slave.
* The driver also takes care of closing the slave and restoring its
* original mac address upon release.
* In addition, block possibility of enslaving before the master is
up.
* This prevents putting the system in an undefined state.
*
* - 2003/05/01 - Amir Noam
* - Added ABI version control to restore compatibility between
* new/old ifenslave and new/old bonding.
* - Prevent adding an adapter that is already a slave.
* Fixes the problem of stalling the transmission and leaving
* the slave in a down state.
*
* - 2003/05/01 - Shmulik Hen
* - Prevent enslaving if the bond device is down.
* - No longer set the MAC address of the master. The bond device will
* take care of this itself
* - Try the SIOC*** versions of the bonding ioctls before using the
* old versions
* - 2002/02/18 Erik Habbinga :
* - ifr2.ifr_flags was not initialized in the hwaddr_notset case,
* SIOCGIFFLAGS now called before hwaddr_notset test
*
* - 2002/10/31 Tony Cureington :
* - If the master does not have a hardware address when the first
slave
* is enslaved, the master is assigned the hardware address of that
* slave - there is a comment in bonding.c stating "ifenslave takes
* care of this now." This corrects the problem of slaves having
* different hardware addresses in active-backup mode when
* multiple interfaces are specified on a single ifenslave command
* (ifenslave bond0 eth0 eth1).
*
* - 2003/03/18 - Tsippy Mendelson and
* Shmulik Hen
* - Moved setting the slave\xd5 s mac address and openning it, from
* the application to the driver. This enables support of modes
* that need to use the unique mac address of each slave.
* The driver also takes care of closing the slave and restoring its
* original mac address upon release.
* In addition, block possibility of enslaving before the master is
up.
* This prevents putting the system in an undefined state.
*
* - 2003/05/01 - Amir Noam
* - Added ABI version control to restore compatibility between
* new/old ifenslave and new/old bonding.
* - Prevent adding an adapter that is already a slave.
* Fixes the problem of stalling the transmission and leaving
* the slave in a down state.
*
* - 2003/05/01 - Shmulik Hen
* - Prevent enslaving if the bond device is down.
* Fixes the problem of leaving the system in unstable state and
* halting when trying to remove the module.
* - Close socket on all abnormal exists.
* - Add versioning scheme that follows that of the bonding driver.
* current version is 1.0.0 as a base line.
*
* - 2003/05/22 - Jay Vosburgh
*
* halting when trying to remove the module.
* - Close socket on all abnormal exists.
* - Add versioning scheme that follows that of the bonding driver.
* current version is 1.0.0 as a base line.
*
* - 2003/05/22 - Jay Vosburgh
*
- ifenslave -c was broken; it\xd5 s now fixed
*
- Fixed problem with routes vanishing from master during enslave
*
processing.
*
* - 2003/05/27 - Amir Noam
*
* - 2003/05/27 - Amir Noam
*
- Fix backward compatibility issues:
*
For drivers not using ABI versions, slave was set down while
*
it should be left up before enslaving.
*
Also, master was not set down and the default set_mac_address()
*
would fail and generate an error message in the system log.
*
- For opt_c: slave should not be set to the master\xd5 s setting