Руководство По Установке для Cisco Cisco 1 GHz GainMaker Amplifier
10
GainMaker Amplifier Reverse Switch Removal Instruction Sheet
748052 Rev C
System Amplifier Reverse Switch Removal,
Continued
Repositioning the Amplifier Module in the Housing
Follow these steps to reposition the amplifier module in the housing.
1.
Line up the RF connectors on the amplifier module and the housing, then
push the module into the housing.
2.
Using a flat-head screwdriver, secure the amplifier module to the housing by
tightening the four module retainer screws from 6 in-lb to 9 in-lb (0.7 Nm to
1.0 Nm).
3.
Plug the 10-pin keyed connector of the power supply cable into the amplifier
module.
Note: The connector can be attached only one way. Be sure it installs
Note: The connector can be attached only one way. Be sure it installs
securely to the module.
4.
Route the power cable through the white plastic retainer clips.