Руководство Пользователя для Cisco Cisco Explorer Set-top Software Version 2.1
Chapter 2 Network Status Diagnostic Screens for all Explorer DHCTs
14
749244 Rev G
Screen Fields and Values
This section describes the fields and possible values that can appear in this
This section describes the fields and possible values that can appear in this
diagnostic screen.
Initialization
Field Name
Description
Possible Values
Status
The status of the overall boot
process
process
In Progress—The DHCT is in the
process of initializing. If In
Progress displays more than 10
minutes, the boot process is
incomplete and the DHCT is not
properly booting.
process of initializing. If In
Progress displays more than 10
minutes, the boot process is
incomplete and the DHCT is not
properly booting.
Ready—The DHCT has completed
the boot process and is in two-way
mode.
the boot process and is in two-way
mode.
Ready-B'cast Only—The DHCT
booted in one-way mode and has
not received an individual UN-
Config message. This is the final
state in a one-way system.
Important:
• Once the status displays
booted in one-way mode and has
not received an individual UN-
Config message. This is the final
state in a one-way system.
Important:
• Once the status displays
Ready, it will not revert back to
Ready-B'cast Only if the
reverse path is lost.
Ready-B'cast Only if the
reverse path is lost.
• Once the status displays
Ready, it will not revert back to
In Progress if the forward
signal is lost.
In Progress if the forward
signal is lost.
• If either signal is lost, contact
Cisco Services
CPU/Bus
The speed, in megahertz (MHz),
at which the microprocessor and
data bus are running
at which the microprocessor and
data bus are running
Hardware-dependent value
Note: This value is displayed as
n/a for Explorer 2000 DHCTs.
n/a for Explorer 2000 DHCTs.
Ev Pool
(Event Pool)
(Event Pool)
The number events available in
the event pool of the OS
the event pool of the OS
[Integer > 0]