Руководство Пользователя для Cisco Cisco Explorer Set-top Software Version 2.1
In-Home Protocol Client Connection Diagnostic Screen
749244 Rev G
181
Screen Fields and Values
This section describes the fields and possible values that can appear in this
This section describes the fields and possible values that can appear in this
diagnostic screen.
Type 2 Service
Field Name
Description
Possible Values
Remote Ihp Mac
The IHP MAC address of
the server
the server
[MAC address]—network-
dependent
dependent
Remote SAP
The IHP MAC address of
the number of the remote
DHCT in this connection. In
many cases, this will be an
MR-DVR server
the number of the remote
DHCT in this connection. In
many cases, this will be an
MR-DVR server
[MAC address]—network-
dependent
dependent
Current State
The current state of the
connection, as described by
IEEE 802.2 Connection
Component states
connection, as described by
IEEE 802.2 Connection
Component states
1—Administration
2—Set Up
3—Normal
4—Busy
5—Reject
6—Awaiting
7—Await Busy
8—Await Reject
9—dConn
10—Reset
11—Error
12—Conn
13—Reset Check
14—Reset Wait
Created
The time that the connection
was made
(MMDD.hhmmss)
was made
(MMDD.hhmmss)
[Time]
Example: 0102.173745 indicates
that the connection occurred on
January 2 at 5:37:45 PM.
Example: 0102.173745 indicates
that the connection occurred on
January 2 at 5:37:45 PM.
I Frame Rx
The number of IHP frames
that the client has received
that the client has received
[Integer > 0]
I Frame Tx
The number of IHP frames
that the client has sent
that the client has sent
[Integer > 0]
Retransmissions
The number of times that
the client should attempt to
transfer PDUs
the client should attempt to
transfer PDUs
[Integer > 0]
Violations
Indicates the number of
protocol violations detected
by this connection
protocol violations detected
by this connection
[Integer > 0]