Руководство По Установке для Cisco Cisco Prisma II EDR Receiver
Installing the Module in the Chassis
25
Installing the Module in the Chassis
To Install the Receiver Modules in the Host Module
Note:
All Prisma II high-density application modules must be installed in a host
module before they can be mounted in a standard Prisma II Chassis.
module before they can be mounted in a standard Prisma II Chassis.
Prisma II host modules prior to Rev C (date codes through A2006) do not
support the Controller Area Network (CAN) bus.
support the Controller Area Network (CAN) bus.
To support CAN bus redundancy, the ICIM2 must be Rev B or later.