Руководство По Установке для Cisco Cisco Prisma II EDR Receiver
Configuring the Module using the ICIM
78-4025693-01 Rev D
83
To Change Service Mode on the Hybrid Amplifier
Complete the following steps to change the module Service mode.
1 From the MAIN menu, press the
key.
2 Press the
key or the
key to scroll to Service.
3 Press the
key to select the Service.
4 Press the
key or the
key to change the service to On or Off.
5 Press the
key to apply the change. The message "Data Saved" appears to
confirm that the change was accepted.
6 Press the
key to continue.