Руководство По Установке для Cisco Cisco Prime Network Services Controller 3.0

Do this:

For this VM:

Enter the following CLI commands from the VSG console,
where x.x.x.x is the NTP server IP address. If you use a host
name, a DNS server must be configured.

clock timezone zone-name offset-hours
offset-minutes
clock summer-time zone-name start-week
start-day start-month start-time end-week

end-day

end-month end-time offset-minutes
ntp server x.x.x.x.

For example, your entries might resemble the following:

clock timezone EST -5.0
ntp server 10.10.1.1

The NTP server command is not available in the VSG
console if you have installed the Prime Network
Services Controller policy agent. To configure NTP
in VSG, you must uninstall the Prime Network
Services Controller policy agent.

Note

VSG

Enter the following CLI command from the VSM console,
where x.x.x.x is the NTP server IP address.

clock timezone zone-name offset-hours
offset-minutes
clock summer-time zone-name start-week
start-day start-month start-time end-week

end-day

end-month end-time offset-minutes
ntp server x.x.x.x

VSM

Configuring NTP in Prime Network Services Controller

Use this procedure to configure NTP in Prime Network Services Controller.

Procedure

Step 1

In your browser, enter https://server-ip-address where server-ip-address is the Prime Network Services Controller IP
address.

Step 2

In the Prime Network Services Controller login window, enter the username admin and the admin user password. This is
the password that you set when installing Prime Network Services Controller.

Step 3

Set the time zone by doing the following:

a) Choose Administration > System Profile > root > Profile > default.