Руководство По Установке для Cisco Cisco OptoStar II 1550nm EDFA
Operating using ICIM LCD, Continued
Sub-Menu 2 -- Channel Control
The illustration below shows sub-menu 2 of the OptoStar II optical switch module
- Channel Control.
- Channel Control.
Factory default sets switching mode to Auto and channel A is set as the main
channel for optical input. By default, the cursor is set on the Auto option and the
module is set to work in auto switching mode. Press ▲▼ button to select auto or
manual switching mode.
channel for optical input. By default, the cursor is set on the Auto option and the
module is set to work in auto switching mode. Press ▲▼ button to select auto or
manual switching mode.
•
To select auto switching mode:
1. Press ▲▼ button to keep the symbol on “Auto” option;
2. Press ► button to move the cursor to “Set”;
3. Press SET button to save the configuration.
2. Press ► button to move the cursor to “Set”;
3. Press SET button to save the configuration.
•
To select manual switching mode:
1. Press ▲▼ button to keep the symbol on “Manual” option;
2. Press ► button to move the cursor to ”Set”;
3. Press SET button to start the configuration;
2. Press ► button to move the cursor to ”Set”;
3. Press SET button to start the configuration;
To switch between channel A and B manually, “Manual” must be selected in the
Mode Selection screen, otherwise channel switching will be unavailable in auto
switching mode.
Mode Selection screen, otherwise channel switching will be unavailable in auto
switching mode.
1. Press ▲▼ button to keep the symbol on Channel A or Channel B option;
2. Press ► button to move the cursor to “Set”;
3. Press SET button to save the configuration.
2. Press ► button to move the cursor to “Set”;
3. Press SET button to save the configuration.
Continued on next page
3-8
Operation
OL-29670-02