Руководство По Установке для Cisco Cisco OptoStar II Driver Amplifier

Скачать
Страница из 67
Operating using ICIM LCD, Continued 
Sub-menu 1 -- Gain Control/RF Input Level 
The illustration below shows sub-menu 1 of the OptoStar II forward driver 
amplifier module - Gain Control/RF Input Level.   
 
The left side of the LCD interface displays the slope control and manual gain 
control of the RF output signal, and the right side displays input level value.   
For the display of RF input level, there are two situations: 
1.  If the RF input signal contains analog signal and digital signal, RF input level 
displays the average level of the single channel analog signal at the broadcast 
RF input port. The forward driver amplifier module detects the total power 
of RF signal. The average level of single channel digital signal is calculated 
according to the actual channel number and the D-value of analog and digital 
channels as set by the customer. 
For example: Input 59 channels in the analog signal, 15 dBmV/channel at the 
broadcast RF input port, 53 channels in the digital signal, 9 dBmV/channel at 
the broadcast RF input port, the D-value between digital signal and analog 
signal is set to 6 dB, RF input level displays 15 dBmV, the digital signal level 
is the displayed RF input level minus 6 dB. 
 
Continued on next page 
 
 
3-8 
 
Operation 
OL-29667-02