Руководство По Установке для Cisco Cisco OptoStar II 1550nm EDFA
Introduction
Description
The OptoStar II intelligent communications interface module uses a standard
19-in OptoStar II chassis. The flexibility of the platform is greatly improved by the
fact that a single chassis can hold both intelligent communications interface
module and other OptoStar II modules. The intelligent communications interface
module is always located in the left-most slot of the standard 3 RU OptoStar II
Chassis. This module is used for communication between each module and the
bus of the network management system, and as an alarm for system failure.
19-in OptoStar II chassis. The flexibility of the platform is greatly improved by the
fact that a single chassis can hold both intelligent communications interface
module and other OptoStar II modules. The intelligent communications interface
module is always located in the left-most slot of the standard 3 RU OptoStar II
Chassis. This module is used for communication between each module and the
bus of the network management system, and as an alarm for system failure.
Features
•
The intelligent communications interface module is used as a communication
interface between each OptoStar II module and the bus of the network
management system.
interface between each OptoStar II module and the bus of the network
management system.
•
Provide a timely alarm in case of system failure
•
The power and data connections are accessible from the front, facilitating easy
installation and maintenance
installation and maintenance
•
Front Panel LED shows fan status, network connection status and
communication status
communication status
•
4. 3-inch color LCD screen is available for configuring and setting parameters
for the modules in other slots.
for the modules in other slots.
•
Intelligent communications interface module (ICIM) provides various
configuration and control options
configuration and control options
-
Local monitoring and control on the ICIM LCD screen
-
Local monitoring and control with ICIM Mini-USB interface connecting to the
Console on PC
Console on PC
-
Remote status monitoring (SNMP) with ICIM RJ-45 interface
•
Firmware is upgradeable
OL-29660-03
Introduction
1-3