Руководство По Установке для Cisco Cisco OptoStar II 1550nm Transmitter
Operating using NMS Software, Continued
View Basic Parameters
Click to select the OptoStar II reverse receiver module in the interface which
shows all the local modules. The parameter setting interface of the OptoStar II
reverse receiver module will display as illustrated below.
shows all the local modules. The parameter setting interface of the OptoStar II
reverse receiver module will display as illustrated below.
The table below lists the basic parameters of the OptoStar II reverse receiver
module.
module.
Basic Parameter
Description
Module Basic Information
Module Node Location
Module Node Location
Shows the IP of the node where the module is
located
S/N
Shows module serial number
Module Firmware Version
Shows module firmware version
Slot ID
Shows the ID of the slot where the module is
placed
Module Temperature
Shows the current module temperature (°C)
Parameters for Each Module
Optical input Power
Optical input Power
Shows optical input power (dBm)
Optical input Status
Shows optical input status: Normal/Fault
Continued on next page
OL-29663-03
Operation
3-27