Белая книга для Cisco Cisco Unified Provisioning Manager 8.5
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 71 of 71
Problem
●
Voice gateway references are not added to that service area.
●
Analog phone is not orderable for the subscriber type.
Recommended action
●
Add voice gateway references to that service area.
●
In case of an upgrade UPM system, analog phone needs to be associated to a subscriber type.
Indication
After provisioning Analog Phone from UPM you cannot see the voice port and dial peer configurations in the voice
gateway.
Problem
Voice gateway is not registered with UCM.
Recommended action
Using the “Generic IOS Router Pre-Built” configuration template, the required configuration can be set in the voice
gateway to get registered with UCM.
Troubleshooting - Voice gateway and Analog Phone Provisioning
Indication
Voice gateway references chooser in the service area UI does not show gateways.
Problem
26. Infrastructure sync of UCM has not been performed.
27. Slot and subunit of voice gateway is not configured.
Recommended action
28. Perform Infrastructure sync of UCM.
29. A value must be specified for the slot and subunit of the gateway. This can be configured from the
Infrastructure Configuration UI or UCM UI (then perform infrastructure sync).
Printed in USA
C07-688057-00 12/11