Листовка для Denon AVR-1911 AVR1911BKE2
Модели
AVR1911BKE2
Denon Brand Company
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
Kanagawa, 210-8569, Japan
www.denon.com
Denon Electronics (USA), LLC.
100 Corporate Drive, Mahwah, New Jersey 07430 USA
100 Corporate Drive, Mahwah, New Jersey 07430 USA
TEL: 201-762-6500 usa.denon.com
Denon Canada Inc.
505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1
505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1
TEL: 905-475-4085 ca.denon.com
17770410 A
*Design and specifications are subject to change without notice.
*“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
*DTS is a registered trademark and the DTS logos, Symbol, DTS-HD
and DTS-HD Master Audio are trademarks of DTS, Inc.
*HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
*Audyssey MultEQ
®
is a registered trademark of Audyssey Laboratories.
Audyssey Dynamic EQ
®
is a trademark of Audyssey Laboratories.
Audyssey Dynamic Volume™ is a trademark of Audyssey Laboratories.
*“Made for iPod” means that an electronic accessory has been designed to
connect specifically to iPod and has been certified by the developer to meet Apple
performance standards.
*“Works with iPhone” means that an electronic accessory has been designed to
connect specifically to iPhone and has been certified by the
developer to meet Apple performance standards.
*Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
*iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
*iPhone is a trademark of Apple Inc.
Main Specifications
Power amplifier section
Preamplifier section
Rated output
*THD figures are power amp stage values.
Input sensitivity/impedance 200 mV / 47 kΩ/kohms
Front L/R
90 W + 90 W
Frequency response
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
S/N Ratio
100 dB (IHF-A weighted, DIRECT mode)
125 W + 125 W
(6 ohms, 1 kHz, THD 0.7%)
(6 ohms, 1 kHz, THD 0.7%)
FM section
Center
90 W
Tuning frequency range 87.5 - 107.9 MHz
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
Usable sensitivity
1.0 µV (11.2 dBf)
125 W
(6 ohms, 1 kHz, THD 0.7%)
(6 ohms, 1 kHz, THD 0.7%)
AM section
Surround L/R
90 W + 90 W
Tuning frequency range 520 - 1710 kHz
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
Usable sensitivity
18 µV
125 W + 125 W
(6 ohms, 1 kHz, THD 0.7%)
(6 ohms, 1 kHz, THD 0.7%)
General
Surround Back L/R
90 W + 90 W
Power supply
AC 120
V, 60 Hz
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
Power consumption
460 W (Standby 0.1 W)
125 W + 125 W
Dimensions (W x H x D)
17-3/32” x 6-47/64” x 15”
(6 ohms, 1 kHz, THD 0.7%)
434 x 171 x 381 mm
Weight
22 lbs 7.8 oz, 10.2 kg
Ports
In
HDMI
x 4
Component
x 1
S-Video
x 1
Composite (Video)
x 3
Analog Audio (Tuner included)
x 7
Digital Optical
x 1
Digital Coaxial
x 1
Out
HDMI Monitor
x 1
Composite Monitor
x 1
Audio Preout (SW)
x 1
Audio Preout (Zone2 L/R)
x 1
Phones
x 1
Other
USB port
x 1
Microphone Port
x 1
Dock Control Port
x 1
FM Tuner Antenna
x 1
AM Tuner Antenna
x 1
Remote Control In/Out
In 1 / Out 1
State-of-the-art Denon Solutions for
Maximizing Content Quality
Maximizing Content Quality
• Fully discrete, identical quality and power
for all 7 channels (90 W x 7ch)
for all 7 channels (90 W x 7ch)
To faithfully reproduce the original surround sound, each of
the AVR-1911’s 7 channels is equipped with the same power
amp of equal power. Since these power amps also use dis-
crete circuits configured with parts strictly selected for their
contribution to high sound quality, rather than with low-cost
integrated circuits (ICs), the surround sound playback is of
impeccably high quality.
the AVR-1911’s 7 channels is equipped with the same power
amp of equal power. Since these power amps also use dis-
crete circuits configured with parts strictly selected for their
contribution to high sound quality, rather than with low-cost
integrated circuits (ICs), the surround sound playback is of
impeccably high quality.
• Featuring 3D pass-through technology
By connecting a 3D-compliant Blue-ray disc player and 3D-
compliant TV to the AVR-1911, you will have a 3D home the-
ater where you can enjoy high-definition sound and video on a
level you’ve never experienced before.
compliant TV to the AVR-1911, you will have a 3D home the-
ater where you can enjoy high-definition sound and video on a
level you’ve never experienced before.
• Suppor ts HDMI 1.4a with 3D, Audio Return
Channel, Deep Color, “x.v.Color” , Auto Lipsync
and HDMI control function
Channel, Deep Color, “x.v.Color” , Auto Lipsync
and HDMI control function
When you connect the AVR-1911 to a TV with a single HDMI
cable, it supports Audio Return Channel (ARC)(*1) that can
play back the TV audio in surround sound. Until now, if you
wanted to enjoy surround sound from a TV, you needed to
use an optical digital cable or coaxial digital cable to bring
sound from the TV to the A/V receiver. The AVR-1911’s ARC
feature, however, helps you keep cable connections neat and
out of the way as you build your home theater.
*1: The TV must also support ARC.
cable, it supports Audio Return Channel (ARC)(*1) that can
play back the TV audio in surround sound. Until now, if you
wanted to enjoy surround sound from a TV, you needed to
use an optical digital cable or coaxial digital cable to bring
sound from the TV to the A/V receiver. The AVR-1911’s ARC
feature, however, helps you keep cable connections neat and
out of the way as you build your home theater.
*1: The TV must also support ARC.
• High-definition audio support
The AVR-1911 has a decoder that supports Dolby TrueHD,
the audio format of Blu-ray disc players, and DTS-HD Master
Audio, another high-grade digital audio format.
the audio format of Blu-ray disc players, and DTS-HD Master
Audio, another high-grade digital audio format.
• Dolby Pro Logic IIz
To experience a dramatically expanded front soundstage,
the AVR-1911 is equipped with a Dolby Pro Logic IIz proces-
sor. By connecting Front Height speakers and using Dolby Pro
Logic IIz playback, you will be able to enjoy surround sound in
the vertical as well as horizontal direction.
the AVR-1911 is equipped with a Dolby Pro Logic IIz proces-
sor. By connecting Front Height speakers and using Dolby Pro
Logic IIz playback, you will be able to enjoy surround sound in
the vertical as well as horizontal direction.
• All sources are up-scaled to 1080P
The AVR-1911 provides an HDMI Video Up-scaling function that
scales analog input video signals to high-definition 1080p signals
and outputs them via the HDMI port to the TV. This not only
makes it unnecessary to connect the TV to the AVR-1911 with
additional cables besides the single HDMI cable, it also lets you
enjoy any video source in refreshingly detailed picture quality.
scales analog input video signals to high-definition 1080p signals
and outputs them via the HDMI port to the TV. This not only
makes it unnecessary to connect the TV to the AVR-1911 with
additional cables besides the single HDMI cable, it also lets you
enjoy any video source in refreshingly detailed picture quality.
• Minimum Signal Path for clear audio and video
signal
signal
The “simple and straight” design concept has been thoroughly
implemented in the signal paths to contribute to immaculately
clean audio and video playback. Signal paths are as short as
possible to keep signal degradation in the audio and video
circuitry to an absolute minimum
implemented in the signal paths to contribute to immaculately
clean audio and video playback. Signal paths are as short as
possible to keep signal degradation in the audio and video
circuitry to an absolute minimum
• Direct Mechanical Ground Construction, embody-
ing concepts for thorough vibration resistance
ing concepts for thorough vibration resistance
Vibration-resistant construction has been reviewed to thor-
oughly suppress the adverse influences of vibration on sound
quality. The power transformers, a source of vibration, have
been securely mounted on the highly rigid bottom chassis. Di-
rect mounting of cast-iron feet to the radiator in near proximity
to each other serves to suppress mutual vibration with the
power transformers and other sources of vibration.
oughly suppress the adverse influences of vibration on sound
quality. The power transformers, a source of vibration, have
been securely mounted on the highly rigid bottom chassis. Di-
rect mounting of cast-iron feet to the radiator in near proximity
to each other serves to suppress mutual vibration with the
power transformers and other sources of vibration.
• Compressed Audio Restorer
to enhance digital music files
to enhance digital music files
Connectivity & Future-ready Expandability
• 4 x HDMI in / 1 x HDMI out (Repeater)
• Direct play for iPod and iPhone via USB
You can also listen to music files from your iPod by simply
connecting it to the AVR-1911’s USB port with the USB
cable that came with the iPod. To start play, just press the
iPod Play button on the AVR-1911 or its remote control
unit. Digital signals from the iPod are transmitted as is to
the AVR-1911 where they pass through the compressed
audio restorer and are processed by advanced audio cir-
cuitry to produce a clean, high-quality sound.
connecting it to the AVR-1911’s USB port with the USB
cable that came with the iPod. To start play, just press the
iPod Play button on the AVR-1911 or its remote control
unit. Digital signals from the iPod are transmitted as is to
the AVR-1911 where they pass through the compressed
audio restorer and are processed by advanced audio cir-
cuitry to produce a clean, high-quality sound.
• Dock connectivity for iPod and network streaming
Network music can be enjoyed via the Denon Networked Con-
trol Dock. (Requires separately-sold ASD-51W or ASD-51N.)
trol Dock. (Requires separately-sold ASD-51W or ASD-51N.)
• Power Amp Assign function, for versatility in using
the AVR-1911 for different purposes
the AVR-1911 for different purposes
The AVR-1911 supports up to 7.1 channels (FL/ FR/ C/ SL/
SR/ SBL/ SBR/ SW) for surround playback defined by the
Blu-ray disc format. To enjoy surround playback with the
AVR-1911’s Dolby Pro Logic IIz, you can reassign the power
amp from the two surround back channels (SBL/SBR) to the
two front high channels (FHL/FHR). Or by assigning the SBL/
SBR power amp to Zone 2, you can enjoy multi-room audio
playback, or to achieve higher-quality sound for 2-channel
stereo playback, you can configure the AVR-1911 for front
bi-amp operation. These are just some of the ways you can
arrange the AVR-1911’s amps to suit various listening styles.
SR/ SBL/ SBR/ SW) for surround playback defined by the
Blu-ray disc format. To enjoy surround playback with the
AVR-1911’s Dolby Pro Logic IIz, you can reassign the power
amp from the two surround back channels (SBL/SBR) to the
two front high channels (FHL/FHR). Or by assigning the SBL/
SBR power amp to Zone 2, you can enjoy multi-room audio
playback, or to achieve higher-quality sound for 2-channel
stereo playback, you can configure the AVR-1911 for front
bi-amp operation. These are just some of the ways you can
arrange the AVR-1911’s amps to suit various listening styles.
Ease-of-use
• On-Screen Display
With the AVR-1911’s on-screen display, you can easily make
settings for your home theater system while viewing menus on
the TV screen. You can check the status of each setting, such
as the volume level when you’re adjusting the volume, or the
name of the input source when switching input sources.
settings for your home theater system while viewing menus on
the TV screen. You can check the status of each setting, such
as the volume level when you’re adjusting the volume, or the
name of the input source when switching input sources.
• Newly developed pre-memory remote control with
Glo-Key buttons
• Remote Setup Guidance via On-Screen Display
• Three Quick Select buttons
• Auto surround mode
• Sleep timer function
• Audio Delay function (max. 6 frames or 200 mSec)
• Muting level settings (Full/-40dB/-20dB)
• Audio level memory, capable of correcting dif-
ferent signal levels for each input device
• Variable subwoofer crossover switching
Glo-Key buttons
• Remote Setup Guidance via On-Screen Display
• Three Quick Select buttons
• Auto surround mode
• Sleep timer function
• Audio Delay function (max. 6 frames or 200 mSec)
• Muting level settings (Full/-40dB/-20dB)
• Audio level memory, capable of correcting dif-
ferent signal levels for each input device
• Variable subwoofer crossover switching