Руководство По Установке для Cisco Cisco Prisma II EDR Receiver
Chapter 3 Operation using ICIM
46
78-4023013-01 Rev C
Operating the ICIM
Using the ICIM
Once the module is installed, it runs without the aid of an operator. Unless alarms
are generated or your system configuration changes, you should not need to make
any adjustments to the module beyond the initial setup.
To Access the ICIM LCD Contrast
To access the ICIM LCD contrast control from the MAIN menu, press the
ICIM
key.
Use the
key to increase or the
key to decrease ICIM display contrast.
ICIM MAIN Menu
A few seconds after power-up, the MAIN menu (shown below) appears. Press the
SEL
key to select the specific option.
Display
Description
Offline
Indicates TNCS communication status with the ICIM.
Modules
Indicates the number of modules in the ICIM domain.
Alarms
Displays the number of modules that are in alarm. Selecting this option
allows scrolling through all modules in alarm condition.
Scroll
Allows scrolling through all modules in the ICIM domain.
Module
Shelf
Slot
Allows selection of any specific module in the ICIM domain.