Белая книга для Cisco Cisco 2112 Wireless LAN Controller
Configure Unified Wireless Network for Authentication Against Novell's eDirectory Database - Cisco Systems
http://kbase/paws/servlet/ViewFile/112137/novell-edirectory-00.xml?convertPaths=1#related[10/7/2010 11:21:40 AM]
1. Configure Local EAP Authentication:
Security > Local EAP > General.
Standard defaults were not changed.
Figure 8
2. Create a new Local EAP Profile:
Security > Local EAP > Profiles.
For this test case, the Local EAP profile name chosen was eDirectory. Authentication methods chosen were LEAP, EAP-FAST and PEAP;
however, only PEAP was tested in this document.
however, only PEAP was tested in this document.
Figure 9
When you configure Local EAP Authentication for PEAP, you must have a certificate installed on the WLC. In this case, for testing purposes,
the factory installed Cisco certificate was used; however, a customer provisioned certificate can also be installed. Client-side certificates are not
required for the use of PEAP-GTC, but they can be enabled for the Inner PEAP method if required.
the factory installed Cisco certificate was used; however, a customer provisioned certificate can also be installed. Client-side certificates are not
required for the use of PEAP-GTC, but they can be enabled for the Inner PEAP method if required.
Figure 10