Руководство Пользователя для Cisco Cisco Content Security Management Appliance M160

mail3.example.com> suspend

Delay (seconds, minimum 30):

[30]> 45

Waiting for listeners to exit...

Receiving suspended.

Waiting for outgoing deliveries to finish...

Mail delivery suspended.

mail3.example.com> resetconfig

Are you sure you want to reset all configuration values? [N]> Y

All settings have been restored to the factory default.

On the Security Management appliance, choose Management Appliances > Centralized Services > 
System Status.

Scroll to the bottom of the page and look under Version Information to see the version of AsyncOS that 
is currently installed. 

Additionally, you can use the version command at the command-line prompt.

Reset all configurations to 
factory defaults 

Clear all reporting counters 

But 

Retain log files 

Retain quarantined messages 

Ensure that you can connect to the appliance after reset using 
the default admin user account and password, either to the 
CLI using the serial interface or to the Management port 
using the default settings. See 

 for information about accessing an 

appliance having default settings. 

Suspend service on the appliance. 

Select Management Appliance > System Administration > 
Configuration File and click Reset. 

After resetting, the appliance automatically returns to the 
online state. If mail delivery was suspended before reset, 
delivery will be attempted again after the reset. 

Reset all configurations to 
factory defaults 

Remove all data 

Use the 

diagnostic > reload

 CLI command. 

This command is NOT the same as the 
similar command used on a Cisco router or 
switch.