Руководство Пользователя для Cisco Cisco TelePresence MX700

8

D14582.15R1 (Rev.1 Nov 2013) User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set,  

MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300

User guide

Adding a camera preset

Most Cisco TelePresence systems let you create 
predefined zoom and camera pointing directions (also 
known as pan). Use these to zoom into the person 
speaking, if appropriate. Do not forget to zoom out 
again afterwards. 

This means that if you want to create one or more 

zoom-in presets you should also create a zoom-out 
(overview) preset to conveniently switch back to 
overview mode.

If you use more than one camera

Some of our video systems support the use of more 
than one camera. In this way you may, for example,  
have one camera providing an overview of the 
participants and another showing the whiteboard.
Note that when you define a camera preset, the 
current pan and zoom of every camera will be saved 
as part of that preset. Consequently, you should make 
sure that every camera has been set to the required 
position before you save the camera positions as a 
new preset.

Tap Camera to invoke 

the Camera menu.

Then tap Add new Preset, as 

outlined. Any camera presets 

already existing will appear in the 

list, as outlined.

Adjust zoom 

in and out 

here

Use these controls to 

define the direction 

in which the camera 

shall point (also known 

as Pan control).

Type in a descriptive name and tap 

Save to put changes into effect.

Tap anywhere outside the menus to exit the menu.