Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
Cisco TelePresence Endpoints running TC5 and Cisco Unified Communications Manager 8.6
Quick Reference Guide
D14878.06 Administering TC5 Endpoints on CUCM 8.6, January 2013.
www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
13
API
WEB
Setting the system password
The system password will restrict access to the codec.
The endpoint is delivered with a default user account with
full credentials. The user name is admin
,
and initially, no
password is set for the default user.
Make sure to keep a copy of the password in a safe place.
We strongly recommend that you set a password
for the admin user, and to any other user with
similar credentials, to restrict access to system
configuration.
NOTE:
The system password set on the endpoint must match
the value set in the Cisco Unified CM in order for the Cisco
TelePresence Manager (CTS-MAN) to discover the endpoint
and provide One Button to Push scheduling to them. Refer to
Setting the system password
Log in to the endpoint through the web interface with your
Log in to the endpoint through the web interface with your
username and current password. If a password is currently
not set, use a blank password when logging on.
1. Set or change the system password
Click on your username in the upper right corner and
choose
Change password
in the drop down menu.
Enter the
Current password
, the
New password
, and
repeat the new password in the appropriate input fields.
The password format is a string with 0–64 characters.
Click
Change password
.
Setting the system password
Log in to the endpoint through the command line interface
Log in to the endpoint through the command line interface
with your username and current password. If a password is
currently not set, use a blank password when logging on.
1. Set or change the system password
xCommand SystemUnit AdminPassword Set
Password: ***********
The password format is a string with 0–64 characters.
The password format is a string with 0–64 characters.
When the system password is set from the command
line interface the codec must be restarted to make
the password apply to the web interface.
Contents
Introduction
Endpoint configuration
CUCM configuration
Setting passwords
Appendices
Endpoint configuration