Руководство Пользователя для Cisco Cisco Content Security Management Appliance M390
2-7
Cisco IronPort AsyncOS 8.0 for Security Management User Guide
Chapter 2 Setup, Installation, and Basic Configuration
the admin web interface through HTTP on port 80 and then, in the same browser, access the
Cisco IronPort Spam Quarantine end user web interface through HTTPS on port 83, you are asked to
reauthenticate if you return to the admin web interface.
Cisco IronPort Spam Quarantine end user web interface through HTTPS on port 83, you are asked to
reauthenticate if you return to the admin web interface.
Note
When accessing the GUI, do not use multiple browser windows or tabs simultaneously to make changes
to the Security Management appliance. Do not use concurrent GUI and CLI sessions either. Doing so
will cause unexpected behavior and is not supported.
to the Security Management appliance. Do not use concurrent GUI and CLI sessions either. Doing so
will cause unexpected behavior and is not supported.
Note
By default, your session times out if you are idle for more than 30 minutes or if you close the browser
without logging out. If this happens, you must reenter your user name and password. To change the
timeout limit, see
without logging out. If this happens, you must reenter your user name and password. To change the
timeout limit, see
.
Accessing the Security Management Appliance Command Line Interface
The command line interface, or CLI, is accessed on the Security Management appliance in the same way
that the CLI is accessed on all Cisco IronPort appliances. There are, however, some differences:
that the CLI is accessed on all Cisco IronPort appliances. There are, however, some differences:
•
System setup must be performed through the GUI.
•
Some CLI commands are not available on the Security Management appliance. For a list of which
commands are not supported, see the Cisco IronPort AsyncOS CLI Reference Guide.
commands are not supported, see the Cisco IronPort AsyncOS CLI Reference Guide.
For production deployments, you should use SSH to access the CLI. Use a standard SSH client to access
the appliance on port 22. For lab deployments, you can also use telnet; however, this protocol is not
encrypted.
the appliance on port 22. For lab deployments, you can also use telnet; however, this protocol is not
encrypted.
Supported Languages
With the appropriate license key, AsyncOS can display the GUI and CLI in any of the following
languages:
languages:
•
English
•
French
•
Spanish
•
German
•
Italian
•
Korean
•
Japanese
•
Portuguese (Brazil)
•
Chinese (traditional and simplified)
•
Russian
To choose the GUI and default reporting language, do one of the following:
•
Set the language preference. See
.