Release Note для Cisco Cisco TelePresence MX700
Known limitations
Cisco TelePresence System C-Series Software Release Notes
Page 121 of 133
Known limitations
TANDBERG
Reference ID
Equipment
Summary
62204
TANDBERG PrecisionHD 1080p Camera
all SW versions.
720p50, 720p30 and 720p25 output has no
CRC included for HD-SDI. Depending on the
device you connect the camera to, you may not
get video using this format. The TANDBERG
codec will support these formats.
Ver. TC2.1.0 and above
Startup scripts will not work with Windows end
of line. You must use Unix end of line to be able
to run multiple commands. Most editors have
the option to set which format to use. If you use
Notepad ++, you can set Unix format in the
Settings/Preferences menu.
67092
Ver. TC2.1.0 and above.
Composite and S-Video video input is shaking.
However some improvements have been made
within TC2.0.
Ver. Any
If you run cascaded cameras and the chained
cameras are running an old camera code, we
have seen that only zoom works when trying to
control the chained camera. The solution is to
control the chained camera. The solution is to
connect the cascaded camera as the first
camera in the chain so that the camera is
detected and upgraded by the codec, or use the
Ethernet upgrade method.
Ver. Any
HD-SDI may not work with cables shorter than
3 meters. This is due to a jitter issue.
3 meters. This is due to a jitter issue.
Ver.Any
If you turn off H.323 as the protocol but leave
default protocol as H.323 you will be unable to
make outgoing calls unless you edit the URI to
include 'sip:' in front of the number or change
the default call protocol to SIP.
66993
Ver. TC3.x and above
The C-series codecs will reduce the
presentation resolution if you are unable to
presentation resolution if you are unable to
sustain a minimum of 1 frame per second.
Any
1920*1200p60 output resolution will run in DVI
compatibility mode and hence audio cannot be
transmitted over HDMI when using this
resolution.
75341
Ver. TC3.x and above
If you dial a TANDBERG 150 with SW version
L5.1.1 or older with encryption setting set to
‘on’, you may not get audio in any direction.
75382
TC3.0.0 and above
The call tab on the web interface doesn’t work
properly with Opera. You can dial, but you will
not get the call status.
82627
TC3.0.0 and above
The call status on the web interface will not be
displayed if you access the codec using
displayed if you access the codec using
HTTPS.