для Cisco Cisco Firepower Management Center 2000
9-12
FireSIGHT System User Guide
Chapter 9 Setting Up Virtual Routers
Configuring Virtual Routers
Setting Up DHCPv6 Relay
License:
Control
Supported Devices:
Series 3
The following procedure explains how to set up DHCPv6 relay on a virtual router.
Note
You cannot run a DHCPv6 Relay chain through two or more virtual routers running on the same device.
To set up DHCPv6 relay:
Access:
Admin/Network Admin
Step 1
Select
Devices > Device Management
.
The Device Management page appears.
Step 2
Next to the device where you want to set up DHCP relay, click the edit icon (
).
The Interfaces tab for that device appears.
Step 3
Click
Virtual Routers
.
The Virtual Routers tab appears.
Step 4
Next to the virtual router where you want to set up DHCP relay, click the edit icon (
).
The Edit Virtual Router pop-up window appears.
Step 5
To set up DHCP relay for DHCPv6, select the
DHCPv6
check box.
Step 6
In the
Interfaces
field, select the check boxes next to one or more interfaces that have been assigned to
the virtual router.
Tip
You cannot disable an interface from the Interfaces tab while it is configured for DHCPv6 Relay. You
must first clear the DHCPv6 Relay interfaces check box and save the configuration.
must first clear the DHCPv6 Relay interfaces check box and save the configuration.
Step 7
Next to a selected interface, click the drop-down icon and select whether the interface relays DHCP
requests
requests
Upstream
,
Downstream
, or
Both
.
Note that you must include at least one downstream interface and one upstream interface. Selecting both
means that the interface is both downstream and upstream.
means that the interface is both downstream and upstream.
Step 8
In the
Max Hops
field, type the maximum number of hops from 1 to 255
Step 9
Click
Save
.
Your changes are saved. Note that your changes do not take effect until you apply the device
configuration; see
configuration; see
.
Setting Up Static Routes
License:
Control
Supported Devices:
Series 3