Технические ссылки для Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch

Using the Command Line Interface

Using a Space in a Command

Cisco Small Business 200E Series Advanced Smart Switch Command Reference

Using a Space in a Command

To include a space in a string, enclose the string in quotes, such as "

string space

Example:

#set contact "Thom Dobro"

Command Modes

Modes group commands according to the function of each command. The
commands in a particular mode are not available until you change to that mode.

The command prompt changes in each command mode to identify the current
mode. The following table describes the command modes and the prompts for
that mode.

NOTE

In the following table, the word switch in the prompt represents the switch
hostname. By default, the hostname is

switch<

last three bytes of the MAC address

You can use the set hostname command to configure a different hostname that will
display in the CLI prompt.

Command Mode

Prompt

Description

Privileged EXEC

switch#

The show commands that
display status and statistics,
some configuration commands,
and access to the Global
Config and VLAN Config
modes.

Global Config

switch (Config)#

General setup commands and
modifications to the running
configuration.

VLAN Config

switch (Vlan)#

VLAN configuration commands.

Interface Config

(switch) (Interface
interface)#

Manage the interfaces.

Access List Config

switch(config-macal)#

Switch management access list
configuration commands.