Руководство Пользователя для Brother LS-30
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
31
STRAIGHT AND ZIGZAG STITCHING
POINTS DROITS ET POINTS ZIGZAG
PUNT
AD
AS RECT
AS
Y ZIGZA
G
PONT
OS RET
O E ZIG-ZA
G
Zigzag Stitching
STITCH LENGTH
1-4 (For the Satin Stitch, set at F.)
STITCH WIDTH
1-5 (For twin needle sewing, always use a
setting of less than 3.)
setting of less than 3.)
NEEDLE POSITION
M, L, R (For twin needle sewing, always set
at M.)
at M.)
PRESSER FOOT
Zigzag
NEEDLE
Single or Twin
Simple Zigzag Stitch
Set the stitch length between 1 and 4 for a simple zigzag stitch.
Set the stitch length between 1 and 4 for a simple zigzag stitch.
NOTE:
Zigzag stitching requires less upper thread tension than straight stitch-
ing.
1. With the stitch length set between 0 and 1, sew 5-6 straight stitches
Zigzag stitching requires less upper thread tension than straight stitch-
ing.
1. With the stitch length set between 0 and 1, sew 5-6 straight stitches
for reinforcement.
2. Set the stitch width to your desired width and begin sewing.
3. Reset the stitch width to between 0 and 1 to reinforce the stitches
3. Reset the stitch width to between 0 and 1 to reinforce the stitches
again before removing the work from the machine.
Satin Stitch
When the stitch length is set in the F range and the stitch width is set
above 1, it produces a Satin Stitch (a close zigzag stitch). The Satin
Stitch can be used for making buttonholes and decorative stitches or
edging.
When the stitch length is set in the F range and the stitch width is set
above 1, it produces a Satin Stitch (a close zigzag stitch). The Satin
Stitch can be used for making buttonholes and decorative stitches or
edging.
NOTE:
It is recommended that a test sample be made on a fabric scrap before
sewing on your project.
It is recommended that a test sample be made on a fabric scrap before
sewing on your project.
Point zigzag
Longueur de point
1-4 (pour le point bourdon, régler sur F.)
Largeur de point
1-5 (lorsque l’aiguille jumelée est utilisée,
toujours régler sur moins de 3.)
toujours régler sur moins de 3.)
Position de l’aiguille
M, L, R (lorsque l’aiguille jumelée est utili-
sée, toujours régler sur M.)
sée, toujours régler sur M.)
Pied-de-biche
Zigzag
Aiguille
Simple ou jumelée
Point zigzag simple
Régler la longueur de point entre 1 et 4 pour un point zigzag simple.
Régler la longueur de point entre 1 et 4 pour un point zigzag simple.
REMARQUE :
La tension du fil supérieur n’a pas besoin d’être aussi importante pour
la couture en zigzag que pour les points droits.
1. La longueur de point entre 0 et 1, faire 5-6 points droits de conso-
La tension du fil supérieur n’a pas besoin d’être aussi importante pour
la couture en zigzag que pour les points droits.
1. La longueur de point entre 0 et 1, faire 5-6 points droits de conso-
lidation.
2. Régler la largeur de point en fonction de la largeur souhaitée et
commencer à coudre.
3. Régler de nouveau la largeur de point entre 0 et 1 pour consolider
de nouveau les points avant de retirer l’ouvrage de la machine.
Point bourdon
Lorsque la longueur de point est dans la plage F et la largeur de point
sur un réglage supérieur à 1, on obtient un point bourdon (un point
zigzag serré). Le point bourdon peut être utilisé pour les boutonnières
et les points fantaisie ou pour les bords.
Lorsque la longueur de point est dans la plage F et la largeur de point
sur un réglage supérieur à 1, on obtient un point bourdon (un point
zigzag serré). Le point bourdon peut être utilisé pour les boutonnières
et les points fantaisie ou pour les bords.
REMARQUE :
Il est conseillé de s’exercer sur une chute de tissu avant de commencer
l’ouvrage proprement dit.
Il est conseillé de s’exercer sur une chute de tissu avant de commencer
l’ouvrage proprement dit.