Руководство По Работе для Brother Innov-is 990D
Attaching the Embroidery Frame 149
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Removing the embroidery
frame
frame
Make sure that the sewing machine is completely
stopped and follow the instructions below.
stopped and follow the instructions below.
a
Raise the presser foot lever.
a Presser foot lever
b
Press
(Needle position button) once or
twice to raise the needle.
a Needle position button
c
Press the part of the embroidery frame holder
in the figure to the left side, and raise the
embroidery frame.
in the figure to the left side, and raise the
embroidery frame.
a Press here to remove.
X
The embroidery frame will separate from the
embroidery frame holder.
embroidery frame holder.
d
Pass the embroidery frame under the presser
foot while raising the presser foot lever even
further.
foot while raising the presser foot lever even
further.
e
Remove the embroidery frame.
CAUTION
a
a
● Do not touch the start/stop button,
needle position button or reverse/
reinforcement stitch button. If one of the
buttons is accidentally pressed, the
machine will begin sewing and your
finger may be pricked with the needle or
the needle may break.
reinforcement stitch button. If one of the
buttons is accidentally pressed, the
machine will begin sewing and your
finger may be pricked with the needle or
the needle may break.