Руководство По Работе для Brother Innov-is 990D
2
Sewing 55
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Starting to sew
Once you are ready to start sewing, you can start the
sewing machine. Sewing can be started and stopped
using the operation button
sewing machine. Sewing can be started and stopped
using the operation button
(Start/stop button) or
the foot controller. For details on the foot controller,
refer to next page.
refer to next page.
Memo
z When the foot controller is plugged in,
(Start/stop button) cannot be used to start
sewing.
sewing.
■ Using the operation button
Sewing can be started and stopped using the
operation button
operation button
(Start/stop button).
a
a
Slide the sewing speed controller to the left or
right to select the desired sewing speed.
Slide the sewing speed controller to the left to
sew at a slower speed, or slide the speed
controller to the right to sew at a faster speed.
right to select the desired sewing speed.
Slide the sewing speed controller to the left to
sew at a slower speed, or slide the speed
controller to the right to sew at a faster speed.
a Sewing speed controller
b
Press
(Start/stop button) once.
a Start/stop button
X
The machine starts sewing.
Memo
z The machine will sew at a slow speed at the
beginning of sewing.
z If you press and hold the
(Start/stop
button) while sewing, the machine will sew
at a slow speed. If you use this function at
the point just before the position where you
want to stop the machine, you can stop the
machine with more precision.
at a slow speed. If you use this function at
the point just before the position where you
want to stop the machine, you can stop the
machine with more precision.
c
c
When the end of the stitching is reached, press
(Start/stop button) once.
X
The machine stops sewing with the needle
lowered (in the fabric).
lowered (in the fabric).
d
Cut the threads.
• For details, refer to "Cutting the thread" (page
59).
Note
z This machine will automatically stop when
the bobbin becomes almost empty. When
the machine stops, replace the bobbin
thread, and then press
the machine stops, replace the bobbin
thread, and then press
(Start/stop button)
to begin sewing again.
a
a