Руководство По Работе для Brother CS7205

KNOWING YOUR SEWING MACHINE

Memo

• If the needle is not raised, the thread take-

up lever cannot be threaded. Be sure to

raise the needle before threading the sewing

machine.

Put the thread behind the needle bar thread
guide.

Needle bar thread guide

Turn off the sewing machine.

CAUTION

• Make sure you turn the power off while

threading the machine without using the

needle threader (for models equipped with the

needle threader). If you accidentally step on

the foot controller and the machine starts to

sew, you could be injured.

Thread the needle from front to back and pull
out about 5 cm (2 inches) of thread.

5 cm (2 inches)

Note

• If the thread take-up lever is lowered, the upper

thread cannot be wrapped around the thread

take-up lever. Make sure you raise the presser foot

lever and the thread take-up lever before you feed

the upper thread.

• If you incorrectly feed the thread you may cause

sewing problems.

■

Using the needle threader (for models

equipped with the needle threader)

CAUTION

• The needle threader can be used with a 75/11

through 100/16 home sewing machine needle.

However, the needle threader cannot be used

with a 65/9 home sewing machine needle.

When using special thread such as transparent

nylon thread or metallic thread, the needle

threader cannot be used.

• Thread with a thickness of 130/120 or thicker

cannot be used with the needle threader.

• The needle threader cannot be used with the

wing needle or the twin needle.

• If the needle threader cannot be used, refer to

“Upper threading” (page 16).

Follow steps

through

of the procedure

in “Upper threading”.

Lower the presser foot lever.

While lowering the needle threader lever,
hook the thread onto the guide.

Needle holder

Needle threader

lever

Guide

Fully lower the needle threader lever.

The hook passes through the eye of the
needle, and catch the thread.

Hook

Thread