Руководство По Работе для Brother CS7205

KNOWING YOUR SEWING MACHINE

Replacing the needle

Raise the needle in the following way.

Turn the handwheel so

that the mark on the

wheel points up.

Press the Needle position

button (for the models

equipped with this button).

Turn off the sewing machine.

CAUTION

• Before replacing the needle, be sure to turn off

the sewing machine, otherwise injuries may

occur if the foot controller or the start/stop

button is accidentally pressed and the machine

starts sewing.

Lower the presser foot lever.

Presser foot

lever

CAUTION

• Before replacing the needle, place fabric or paper

under the presser foot to prevent the needle from

falling into the hole in the needle plate.

Remove the needle by turning the needle
clamp screw counterclockwise.

Disc-shaped screwdriver

Needle clamp screw

Note

• If the needle clamp screw is loosened too

much, the needle clamp (which holds the

needle) may fall off. Therefore, do not

loosen the needle clamp screw too much.

• Do not apply strong force when loosening or

tightening the needle clamp screw, otherwise
certain parts of the sewing machine may be
damaged.

With the flat side of the needle toward the
rear of the machine, insert the needle until it
touches the needle stopper.

Needle stopper

Tighten the needle clamp screw by turning it
clockwise.

• Install the twin needle in the same way.

CAUTION

• Be sure to insert the needle until it touches the

needle stopper and securely tighten the needle

clamp screw with the disc-shaped screwdriver,

otherwise the needle may break or damage

may result.

Sewing with the twin needle

You can sew with this needle and two top threads.
You can use the same color or two different colors of
thread for making decorative stitches.

Twin needle

Extra spool pin