Руководство По Работе для Brother CS7205

- To reduce the risk of electric shock:

  Always unplug the machine from the electrical 

outlet immediately after using, when cleaning, 
when making any user servicing adjustments 
mentioned in this manual, or if you are leaving 
the machine unattended.

- To reduce the risk of burns, fire, electric shock, or 
injury to persons.

  Always unplug the machine from the electrical 

outlet when making any adjustments mentioned 
in the instruction manual:

• To unplug the machine, switch the machine to the

symbol “O” position to turn it off, then grasp the 
plug and pull it out of the electrical outlet. Do not 
pull on the cord.

• Plug the machine directly into the electrical outlet.

Do not use an extension cord.

• Always unplug your machine if the power is cut.

  Electrical Hazards:

• This machine should be connected to an AC

power source within the range indicated on the 
rating label. Do not connect it to a DC power
source or inverter. If you are not sure what kind 
of power source you have, contact a qualified 
electrician.

• This machine is approved for use in the country of

purchase only.

  Never operate this machine if it has a damaged 

cord or plug, if it is not working properly, if 
it has been dropped or damaged, or water is 
spilled on the unit. Return the machine to the 
nearest authorized dealer or service center for 
examination, repair, electrical or mechanical 
adjustment.

• While the machine is stored or in use if you

notice anything unusual, such as an odor, heat, 
discoloration or deformation, stop using the 
machine and immediately unplug the power cord.

• When transporting the machine, be sure to carry it

by its handle. Lifting the machine by any other part 
may damage the machine or result in the machine 
falling, which could cause injuries.

• When lifting the machine, be careful not to make

any sudden or careless movements, otherwise you 
may injure your back or knees.

  Always keep your work area clear:

•  Never operate the machine with any air openings

blocked. Keep ventilation openings of the 
machine and foot control free from the build up 
of lint, dust, and loose cloth.

•  Do not store objects on the foot controller.
•  Do not use extension cords. Plug the machine

directly into the electrical outlet.

•  Never drop or insert any object into any opening.
•  Do not operate where aerosol (spray) products

are being used or where oxygen is being 
administered.

•  Do not use the machine near a heat source, such

as a stove or iron; otherwise, the machine, power 
cord or garment being sewn may ignite, resulting 
in fire or an electric shock.

•  Do not place this machine on an unstable

surface, such as an unsteady or slanted table, 
otherwise the machine may fall, resulting in 
injuries.

  Special care is required when sewing:

•  Always pay close attention to the needle. Do not

use bent or damaged needles.

•  Keep fingers away from all moving parts. Special

care is required around the machine needle.

•  Switch the machine to the symbol “O” position

to turn it off when making any adjustments in the 
needle area.

•  Do not use a damaged or incorrect needle plate,

as it could cause the needle to break.

•  Do not push or pull the fabric when sewing, and

follow careful instruction when freehand stitching 
so that you do not deflect the needle and cause 
it to break.