Справочник Пользователя для Moxa EDS-P308-S-SC-T

 

 

15

Top View

Front View

Grounding and wire routing help limit the effects 
of noise due to electromagnetic interference (EMI). 
Run the right most contact of the 3-contact 
terminal block to the grounding surface prior to 
connecting devices. 

 

 

ATTENTION 
This product is intended to be mounted to a well-grounded 
mounting surface, such as a metal panel. 

 

The two left-most contacts of the 3-contact terminal block connector on the 
SPL-24’s top panel are used for 24 VDC output. Top and front views of one of 
the terminal block connectors are shown here. 

 

STEP 1:   
Insert the negative/positive DC wires into the V-/V+ 
terminals.  

STEP 2:   
To keep the DC wires from pulling loose, use a small 
flat-blade screwdriver to tighten the wire-clamp screws 
on the front of the terminal block connector.   

STEP 3:   
Insert the plastic terminal block connector prongs into 
the terminal block receptor, which is located on 
SPL-24's top panel. 

 

 

www.moxa.com/support 

 

Moxa Americas: 
Toll-free: 1-888-669-2872 
Tel: +1-714-528-6777 
Fax: +1-714-528-6778 

Moxa China (Shanghai office): 
Toll-free: 800-820-5036 
Tel: +86-21-5258-9955 
Fax: +86-10-6872-3958 

Moxa Europe: 
Tel: 

+49-89-3 70 03 99-0 

Fax: 

+49-89-3 70 03 99-99 

Moxa Asia-Pacific: 
Tel: +886-2-8919-1230 
Fax: +886-2-8919-1231