Руководство По Установке для Brother QL-550

Introduction

12

„

The Printer

•

The printer may malfunction if left near a television, radio, etc. Do not use the printer near 

any printer that can cause electromagnetic interference.

•

Do not expose the printer to direct sunlight or near heaters or other hot appliances, in 

any location exposed to extremely high or low temperatures, high humidity or dusty 

locations. The recommended temperature range is between 50°F to 95 °F (10°C to 

35°C).

•

Do not use paint thinner, benzene, alcohol or any other organic solvents to clean the 

printer. Doing so may cause damage to the surface finish. Use a soft, dry cloth to clean 

the printer.

•

Do not insert any objects into or block the label output slot, USB port, or serial port.

•

Use only the interface cable (USB cable) included with the printer.

•

When not in use for an extended period, remove the DK Roll from the printer.

•

Do not attempt to print labels while the DK Roll cover is open.

•

There is a noise from the printer while printing due to 

the speed printing (this is not a failure of the printer).

Set "print quality" of the printer driver setting to reduce 

the noise. 

•

If a paper jam should occur due to a build up of 

adhesive on the paper guide surface, unplug the power 

cord from the electrical outlet and wipe away the 

adhesive buildup on the paper guide surface with a 

cloth dipped in ethanol or isopropyl (rubbing) alcohol. It 

is recommended that you clean the paper guide when 

replacing the cutter unit.

„

DK Roll (DK Label and DK Tape)

•

Use only genuine Brother accessories and supplies (with 

,

 

 marks). Do not use any 

unauthorized accessories or supplies.

•

If the label is attached to a wet, dirty, or oily surface, it may peel off easily. Before 

applying the label, clean the surface to which the label will be applied.

•

DK Roll uses thermal paper and thermal film so that ultraviolet rays, wind, and rain may 

cause the color of the label to fade and the ends of the label to peel off.

•

Do not expose the DK Rolls to direct sunlight, high temperatures, high humidity, or dust. 

Store in a cool, dark place. Use the DK Rolls soon after opening the package.

•

Scratching the printed surface of the label with your finger nails or metal objects, or 

touching the printed surface with hands dampened by water, sweat, or medicated cream, 

etc., can cause the color to change or fade.

•

Do not apply labels to any persons, animals, plants, or in public locations.

•

As the end of the DK Roll is designed to not adhere to the label spool, the last label may 

not be cut properly.

If this happens, remove the remaining labels, insert a new DK Roll, and reprint the last 

label.

Note: To account for this, the number of DK Labels included on each DK Roll may be 

more than indicated on the package.

•

When peeling a DK Label, some portion of the label may remain. Remove the remaining 

portion before attaching a new label.

•

Some DK Rolls use permanent adhesive for their labels. These labels cannot be neatly 

peeled off once attached.

Paper guide surface