Руководство По Установке для Brother QL-550

STEP1 Before using the printer

22

The printer contains a paper guide which can hold up to 10 individual label sheets.

Check that the roll release lever 

is in the up position.

Insert the edge of DK Roll into 

the printing unit, and pull it out 

to just in front of the cutter.

Push down the roll release lever and close the 

DK Roll cover.

When the DK Roll could not be pulled out to just before 

the cutter in the step 4, insert the edge of DK Roll as 

possible and pull down the roll release lever, and then 

close the roll release lever.

Pressing Feed button feeds the DK Roll to the correct 

position (when using DK Tape, cut the fed tape as 

needed).

As shown right, attach the 

paper guide to the front face of 

the printer.

When printing more than 10 

labels continuously using the 

auto cut function, remove the 

paper guide to prevent a paper 

jam.

Roll release lever

Printing unit

Cutter

Paper guide