Руководство По Установке для Brother QL-550

53

STEP

1

STEP

2

STEP

3

STEP

4

When the glue is attached on the label 

outlet (metallic plate part and resin 

guide part) and the printer chews up a 

label, pull out the power plug from the 

outlet and clean it up with cloth dipped 

into ethanol or isopropyl alcohol.

It is recommended to clean the label 

outlet when replacing the cutter unit.

Insert the edge (A) of cleaning sheet into the printing unit and pull it 

out to just in front of the cutter.

•

Insert the sheet without removing the A part of sheet.

•

Check that the printing surface of cleaning sheet is upward.

After inserting the cleaning sheet into the 

printing unit, push down the roll release lever 

and remove the B part of cleaning sheet.

Close the DK Roll cover and turn ON the power of the printer.

Press the Feed button for more than one 

second.

The roller spins by 4" (10 cm).

The adhesive face of cleaning sheet removes the stain 

or dust on the roller.

•

If not pressing the Feed button for more than one 
second, the roller spins only 1/3" (8 mm).

•

Dispose the cleaning sheet after use.

Feed button

Label outlet