Руководство По Работе для Brother DZ3000

14

KNOWING YOUR SEWING MACHINE ———————————————————————————————————————————————————————————————————————————————————

a

a Main power switch
b Jack/socket connector

b

X

The sewing light comes on when the 

machine is turned on.

● When the machine is turned on, the needle 

and the feed dogs will make sound when 
they move; this is not a malfunction.

c

{

X

The sewing light goes off when the 
machine is turned off.

● If a power outage occurs while the sewing 

machine is being operated, turn off the 
sewing machine and unplug the power 
supply cord. When restarting the sewing 
machine, follow the necessary procedure to 
correctly operate the machine.

(For U.S.A. only)

● This appliance has a polarized plug (one 

blade wider than the other). To reduce the 
risk of electric shock, this plug is intended 
to fit in a polarized outlet only one way. If 
the plug does not fit fully in the outlet, 
reverse the plug.
If it still does not fit, contact a qualified 
electrician to install the proper outlet. Do 
not modify the plug in any way.

Insert the foot controller plug into its jack/socket on 
the rear side of the sewing machine.

a Foot controller jack/socket

When you press the foot controller down lightly, the 
machine will run at a low speed. When you press 
harder, the machine’s speed will increase. When you 
take your foot off the foot controller, the machine 
will stop. 

You should make sure that nothing is placed on the 
foot controller when the machine is not in use.

● When the foot controller is plugged in, the 

start/stop button cannot be used to start 
sewing (only for models equipped with the 
start/stop button).

2

1

● When connecting the foot controller, be sure 

● Do not allow pieces of cloth and dust to build 

Slower

Faster