Руководство По Работе для Brother DZ3000

35

f

a Thread guide cover

• For details, refer to step 

h

 through 

k

 of 

“Upper threading” (page 25).

g

Without passing the thread through the 
needle bar thread guide, manually thread the 
right needle.
Pass the thread through the eye of the needle 
from the front to the back.

h

Attach zigzag foot “J”.
• For details on changing the presser foot, refer 

to “Replacing the presser foot” (page 36).

Models equipped with a needle threader
● You cannot use the needle threader to 

thread the twin needle. Instead, thread the 
twin needle by hand, from front to back. 
Using the needle threader may damage the 
machine.

i

j

Select a stitch.
• For details on selecting a stitch, refer to 

“Selecting a stitch” (page 39).

• For details on the stitches that can be sewn 

with the twin needle, refer to “STITCH 
SETTINGS” (page 81).

k

Start sewing.
For details on starting to sew, refer to “Starting 
to sew” (page 41).

X

Two lines of stitching are sewn parallel 
to each other.

● When using the twin needle, the stitches 

may become bunched together, depending 
on the types of thread and fabric that are 
used. If this occurs, increase the stitch 
length. For details on adjusting the stitch 
length, refer to “Adjusting the stitch length 
and width” (page 40).

● When using the twin needle, be sure to attach 

● After adjusting the stitch width, slowly turn 

● When changing the sewing direction, be sure 

● Do not try turning the fabric with the twin