Руководство По Работе для Brother CS7130
2
24
SEWING BASICS
SEWING
Basic sewing operations are described below.
Before operating the sewing machine, read the
following precautions.
Before operating the sewing machine, read the
following precautions.
CAUTION
• While the machine is in operation, pay special
attention to the needle location. In addition,
keep your hands away from all moving parts
such as the needle and handwheel, otherwise
injuries may occur.
• Do not pull or push the fabric too hard while
sewing, otherwise injuries may occur or the
needle may break.
• Never use bent needles. Bent needles can
easily break, possibly resulting in injuries.
• Make sure that the needle does not strike
basting pins, otherwise the needle may break
or bend.
General sewing procedure
Follow the basic procedures below to sew.
1 Turn on the machine.
Turn on the sewing machine.
For details on turning on the machine, refer to
“Power supply” (page 9).
2 Select the stitch.
Select the stitch appropriate for the area to be
sewn.
For details on selecting a stitch, refer to “Selecting
a stitch” (page 24).
3 Attach the presser foot.
Attach the presser foot appropriate for the stitch.
For details on replacing the presser foot, refer to
“Replacing the presser foot” (page 22).
4 Start sewing.
Position the fabric, and then start sewing. When
sewing is finished, cut the threads.
For details on starting to sew, refer to “Starting to
sew” (page 25).
Selecting a stitch
When the sewing machine is turned on, the straight
stitch ( left needle position) is selected.
stitch ( left needle position) is selected.
1
Turn on the sewing machine.
2
(For models equipped with the stitch category
selection key)
Confirm that the utility stitch indicator is
lit. If it is not lit, press the stitch category
selection key repeatedly until the utility stitch
indicator is lit.
1
Stitch category selection key
2
Utility stitch indicator
Memo
• For selecting the mirror image stitch, press
the stitch category selection key repeatedly
until the mirror image stitch indicator is lit.
3
Mirror image stitch indicator
3
Press (stitch selection keys) to designate
the desired stitch number.
the desired stitch number.
1
Designates the tens digit.
2
Designates the ones digit.
X
The stitch is selected.
4
Attach the presser foot indicated in the LCD.
The display location of the presser foot type
differs depending on the model. This manual
uses the illustrations of type A LCD.
For models equipped with type A LCD
The display location of the presser foot type
differs depending on the model. This manual
uses the illustrations of type A LCD.
For models equipped with type A LCD
For models equipped with type B LCD
1
Presser foot type
• For details, refer to “Replacing the presser
foot” (page 22).