Руководство По Работе для Brother CS7130
UTILITY STITCHES
47
3
6
If you would like to only sew this single
character, start sewing.
If you would like to sew a sequence of
characters, see the following procedure.
• For details on sewing characters, refer to
character, start sewing.
If you would like to sew a sequence of
characters, see the following procedure.
• For details on sewing characters, refer to
“Sewing the character stitches” (page 48).
■
Combining characters
You can easily sew names, messages, etc. by
combining the character stitches. Up to 35
characters can be combined.
[Example] Selecting stitches “COME” (No.
03)+(No. 15)+(No. 13)+(No. 05)
combining the character stitches. Up to 35
characters can be combined.
[Example] Selecting stitches “COME” (No.
03)+(No. 15)+(No. 13)+(No. 05)
1
Follow steps
1
through
5
in “Selecting
characters” (page 46) to select the first
character “C” (No. 03).
character “C” (No. 03).
2
Press (stitch selection keys) to select the
next character, “O” (No. 15).
next character, “O” (No. 15).
3
Press the “+” side of
(stitch width
adjustment key) to enter the selected
character.
character.
4
Repeat steps
2
and
3
to add “M” (No. 13)
and “E” (No. 05).
Memo
• To enter a space, select “_” (No. 30).
5
When you have finished combining
characters, check the entered characters and
their order.
characters, check the entered characters and
their order.
• For details on checking characters, refer to
“Checking characters” (page 48).
Memo
• A new character can only be added next to
the last character. You cannot insert a new
character between characters or before the
first character of the sequence.
6
After checking the entered characters, start
sewing.
• For details on sewing characters, refer to
sewing.
• For details on sewing characters, refer to
“Sewing the character stitches” (page 48).
Memo
• The combination of characters will be stored in
memory even if you turn off the machine.
■
Adding new characters after sewing
After sewing a combination of characters, you
can add characters to the combination using the
following method.
can add characters to the combination using the
following method.
Memo
• When you have finished sewing, the pattern No.
of the first character in the current combination is
shown on the LCD.
1
Press the stitch category selection key to
select the character stitch again. (Do not skip
this step.)
select the character stitch again. (Do not skip
this step.)
1
Stitch category selection key
2
Add new characters by following the
procedure described in “Combining
characters” (page 47).
procedure described in “Combining
characters” (page 47).
X
New characters are added next to the last
character of the combination.
character of the combination.
■
Making a new combination of characters after
sewing
Memo
• When you have finished sewing, the pattern No.
of the first character in the current combination is
shown on the LCD.