Руководство Пользователя для Brother ADS-3600W

Configuring Your Machine for a Wireless Network (ADS-2800W / ADS-3600W)

Does your mobile device support the one-push method for Wi-Fi Protected Setup™ (WPS)?

To use the Brother iPrint&Scan functionality in a Wi-Fi Direct

network configured by one-push method or by

PIN Method configuration, the device you use to configure Wi-Fi Direct

must be running Android™ 4.0 or

greater.

Configure Your Wi-Fi Direct

Network Using the One-Push Method

If your mobile device supports Wi-Fi Direct

, follow these steps to configure a Wi-Fi Direct

network.

NOTE

When the machine receives the Wi-Fi Direct

request from your mobile device, the message Wi-Fi

Direct connection request received. Press [OK] to connect. appears on the LCD. Press
OK to connect.

Press

Network > Wi-Fi Direct > Push Button.

Activate Wi-Fi Direct

on your mobile device (see your mobile device’s user’s guide for instructions)

when Activate Wi-Fi Direct on other device. Then Press [OK]. appears on the

machine’s LCD. Press OK on your machine to start the Wi-Fi Direct

setup. To cancel, press

Do one of the following:



When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine
directly.



When your Brother machine is not the G/O, it displays the names of the devices that allow you to
configure a Wi-Fi Direct

network. Select the mobile device you want to connect to and press OK.

Search for the available devices again by pressing Rescan.

If your mobile device connects successfully, the machine’s LCD displays Connected. You have now

completed the Wi-Fi Direct

network setup.

Option

Description

Yes