Руководство По Работе для Brother Innov-is 6700D

42 

Saving Image Data

Saved data that has been converted to embroidery data cannot be recalled with My Custom 
Design. To recall data and edit it with My Custom Design, save the image data on USB media 
before converting it to embroidery data or press 

 after the conversion to return to the 

pattern drawing screen, and then save the data.

Insert USB media into the USB port located on the 
right side of the machine.

Caution
•  Do not insert anything other than USB media into the

USB media port. Otherwise, the USB media drive may 
be damaged.

•  Do not insert USB media containing pattern data other

than those saved using this application. (Only .pm7 and 
.phc data can be used.)

  Press 

.

*  If the pattern is displayed in the enlarged area, the enlarged 

display will be canceled, then the pattern is saved.

*  If the 

 key or the 

 key is selected, the 

 key will 

be selected instead, then the pattern is saved.

  The screen shown at the left appears. If the image 

data  was  saved  successfully,  the  previous  screen 
automatically appears.

*  Saving image data takes approximately 3 seconds.

Do not turn off the machine while the [Saving] message is
displayed, otherwise saved data may be lost. In addition, 
do not try to remove the USB media, otherwise the USB 
media may be damaged.