Руководство По Работе для Brother Innov-is 85e
GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
34
d
Insert the extra spool pin into the end of the
bobbin winder shaft.
bobbin winder shaft.
e
Install the thread spool and thread the upper
thread.
thread.
Memo
z When setting the thread spool, set it so that
the thread winds off from the front of the
spool.
spool.
f
Thread the upper thread for the right side in
the same way that the upper thread for the left
side was threaded.
the same way that the upper thread for the left
side was threaded.
a Thread guide cover
• For details, refer to step
i
through
l
of
“Threading the upper thread” (page 28).
g
Without passing the thread through the needle
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front.
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front.
h
Attach zigzag foot “J”.
• For details on changing the presser foot, refer
to “Replacing the presser foot” (page 41).
CAUTION
i
Turn on the sewing machine.
X
The LCD comes on.
a Bobbin winder shaft
b Extra spool pin
c Thread spool
b Extra spool pin
c Thread spool
1
● When using the twin needle, be sure to
attach zigzag foot “J”, otherwise the
needle may break or the machine may be
damaged.
needle may break or the machine may be
damaged.