Руководство По Работе для Brother Innov-is 6700D
SEWING THE STITCHES
130
g
Pull out the straight stitch threads.
Heirloom
■ Hemstitching (1) (Daisy Stitch)
Use for sewing tablecloths, decorative hems, and
decorative stitching on shirt fronts.
decorative stitching on shirt fronts.
a
Insert a type 130/705H, size 100/16 Wing
needle.
needle.
*
This specialty sewing needle is not furnished with
your machine. Must be purchased separately.
your machine. Must be purchased separately.
b
Select a stitch and attach presser foot “N”.
*
Select any stitch between 3-01 and 3-25.
c
Start sewing.
Example: Illustration of finished product
■ Hemstitching (2) (Drawn Work (1))
a
Pull out several threads from one area on a
piece of fabric to open the area.
piece of fabric to open the area.
*
Pull out 5 or 6 threads to leave a 3 mm
(approx. 1/8 inch) area open.
(approx. 1/8 inch) area open.
Memo
• Use a light to medium weight homespun fab-
ric with a little stiffness.
CAUTION
• The “Automatic Threading” button cannot be
used. Thread the wing needle by hand, from
front to back. Using the “Automatic
Threading” button may result in damage to the
machine.
front to back. Using the “Automatic
Threading” button may result in damage to the
machine.
• A more attractive finish can be obtained if you
use a “130/705H Wing” needle when sewing
these patterns. If using a wing needle and the
stitch width has been set manually, check that
the needle will not touch the presser foot by
carefully rotating the handwheel toward you
(counterclockwise) before starting to sew.
these patterns. If using a wing needle and the
stitch width has been set manually, check that
the needle will not touch the presser foot by
carefully rotating the handwheel toward you
(counterclockwise) before starting to sew.
Memo
• For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of
this manual.
this manual.
Memo
• Loosely woven fabrics work best for this.