Руководство По Работе для Brother Innov-is 6700D

214

b

→ A window appears so that the area containing the 

embroidery positioning sticker can be selected.

c

*

If an area is not selected, scanning will start from the 
center.

• When inserting the fabric in the embroidery 

frame, check that the embroidery pattern fits 
within the embroidery field for the frame that 
is used.

a Embroidery field

b Embroidery pattern
c Embroidery positioning sticker

• Depending on the type of fabric that is used, 

a part of the embroidery positioning sticker 
may remain attached when it is peeled off. 
Before using the embroidery positioning 
sticker, check that it can be cleanly removed 
from a scrap piece of the fabric to be used.

• Scanning cannot start from the center after 

an area has been selected. To scan from the 

center, press 

 to close the window, 

then display the window again but do not 

select an area to scan, then press 

.

• If the embroidery positioning sticker 

overlaps two areas, select either of the two 
areas.