Руководство По Работе для Brother Innov-is 4500D
CARE AND MAINTENANCE
Ap
pe
ndi
x
pe
ndi
x
237
8
h
Insert the bobbin case so that the S mark
on the bobbin case aligns with the
on the bobbin case aligns with the
● mark
on the machine.
*
Align the
▲ and ● marks.
a
▲ mark
b
● mark
c Bobbin case
*
*
Make sure that the indicated points are aligned
before installing the bobbin case.
before installing the bobbin case.
i
Insert the tabs on the needle plate cover
into the needle plate, and then slide the
cover back on.
into the needle plate, and then slide the
cover back on.
Precautions on Storing the
Machine
Machine
Do not store the machine in any of the locations
described below, otherwise damage to the
machine may result, for example, rust caused by
condensation.
described below, otherwise damage to the
machine may result, for example, rust caused by
condensation.
*
Exposed to extremely high temperatures
*
Exposed to extremely low temperatures
*
Exposed to extreme temperature changes
*
Exposed to high humidity or steam
*
Near a flame, heater or air conditioner
*
Outdoors or exposed to direct sunlight
*
Exposed to extremely dusty or oily environments
a
b
b
a
c
Note
• Never use a bobbin case that is scratched;
otherwise, the upper thread may become
tangled, the needle may break, or sewing
performance may suffer. For a new bobbin
case (part code: XC3153-351 (green screw),
XC8167-551 (pink screw)), contact your
nearest authorized service center.
tangled, the needle may break, or sewing
performance may suffer. For a new bobbin
case (part code: XC3153-351 (green screw),
XC8167-551 (pink screw)), contact your
nearest authorized service center.
• Be sure that the bobbin case is correctly
installed. Otherwise, the needle may break.
• If the needle plate has been removed it is
especially important to reinstall the needle
plate and tighten the screws prior to install-
ing the bobbin case.
plate and tighten the screws prior to install-
ing the bobbin case.
Note
• In order to extend the life of this machine,
periodically turn it on and use it. Storing this
machine for an extended period of time
without using it may reduce its efficiency.
machine for an extended period of time
without using it may reduce its efficiency.