Руководство По Работе для Brother Innov-is 4500D

46

b

b

b

b

c

c

c

c

Reverse/reinforcement stitches are generally 
necessary at the beginning and end of sewing. You 
can use the “Reverse/Reinforcement Stitch” button 
to sew reverse/reinforcement stitches manually 
(see page 3). 

If the automatic reinforcement stitch is selected on 
the screen, reverse stitches (or reinforcement 
stitches) will be sewn automatically at the 
beginning of sewing when the “Start/Stop” button 
is pressed. Press the “Reverse/Reinforcement 
Stitch” button to sew reverse stitches (or 
reinforcement stitches) automatically at the end of 
sewing (see page 51).

Sew slowly while keeping the seam parallel with 
the fabric edge as you guide the fabric around the 
curve.

Stop the machine. Leave the needle in the fabric, 
and press the “Presser Foot Lifter” button to raise 
the presser foot. Using the needle as a pivot, turn 
the fabric so that you can sew in the new 
direction. Press the “Presser Foot Lifter” button to 
lower the presser foot and start sewing.

The pivot setting is useful when changing the 
sewing direction. When the machine is stopped at 
the corner of the fabric, the machine stops with the 
needle in the fabric and the presser foot is 
automatically raised so the fabric can easily be 
rotated (see “Pivoting” on page 53).

■ Sewing a Seam Allowance of 0.5 cm 

Baste the corner before sewing, and then, after 
changing the sewing direction at the corner, pull the 
basting thread toward the back while sewing.

a 5 mm (approx. 3/16 inch) 

The speed set using the sewing speed con-
troller is the foot controller’s maximum sewing 
speed.

(For U.S.A. only)

Foot controller: Model S

This foot controller can be used with model 
NV4500D

a