Руководство По Работе для Brother Innov-is 6700D
9
Removing the Border Embroidery
Frame
Frame
a
Raise the frame-securing lever and pull the
border embroidery frame toward you.
border embroidery frame toward you.
Embroidering the Next Pattern
a
Press both lock release buttons and slide the
fabric to align the embroidering area of the
next pattern, and rehoop the fabric in the
border embroidery frame.
fabric to align the embroidering area of the
next pattern, and rehoop the fabric in the
border embroidery frame.
a
Pattern embroidered first
b
Position of pattern to be embroidered next
c
Embroidering area of embroidery sheet
b
Attach the border embroidery frame to the
embroidery unit, and then press
embroidery unit, and then press
.
Note
• Before removing the border embroidery frame from
the embroidery unit, make sure that the embroidery
unit carriage has moved to its initial position.
unit carriage has moved to its initial position.
CAUTION
• If the thread has become tangled and the
embroidery unit carriage does not move to its initial
position, even after the thread is cut, turn off the
machine, manually gently move the carriage, and
then remove the border embroidery frame.
position, even after the thread is cut, turn off the
machine, manually gently move the carriage, and
then remove the border embroidery frame.
• Only move the embroidery unit carriage when the
machine is turned off.
Note
• Adjust the position of the fabric so that the
embroidering area for the next pattern is within the
embroidering area of the embroidery sheet.
embroidering area of the embroidery sheet.