Руководство По Работе для Brother Innov-is 6700D
22
Changing the Position of a Sticker
If the selected pattern or positioning stickers for
connecting the next pattern do not easily fit in the
embroidering area, follow the on-screen instructions
that appear after step
connecting the next pattern do not easily fit in the
embroidering area, follow the on-screen instructions
that appear after step
on page 18 in order to move
the positioning stickers.
For an example, the on-screen instruction appears
when you use the embroidery frame with a size of 10
cm × 10 cm (4 inches × 4 inches) to connect patterns as
shown below.
For an example, the on-screen instruction appears
when you use the embroidery frame with a size of 10
cm × 10 cm (4 inches × 4 inches) to connect patterns as
shown below.
a
Pattern1X.pes
b
Pattern2X.pes
a
Refer to steps
through
(Connecting Three Patterns)” using the
embroidery frame with a size of 10 cm × 10
cm (4 inches × 4 inches) to embroider the first
pattern and to connect the second pattern.
embroidery frame with a size of 10 cm × 10
cm (4 inches × 4 inches) to embroider the first
pattern and to connect the second pattern.
Note
• When referring to steps
through
, make sure
you change the reference edge and reference point
to reflect this exercise.
to reflect this exercise.