Руководство По Работе для Brother Innov-is 6700D
6
Using the Multi-Function Foot Controller
With the multi-function foot controller, various sewing machine operations in addition to starting/stopping sewing,
such as thread cutting and reverse stitching, can be specified to be performed. In addition, the small pedal can be
installed on either the left or right side of the large pedal to suit your preference.
such as thread cutting and reverse stitching, can be specified to be performed. In addition, the small pedal can be
installed on either the left or right side of the large pedal to suit your preference.
Included Items
Functions That Can Be Specified
* If you set the “Reverse Stitch” function on the heel switch,
machine operates the same as pressing the “Reverse/
Reinforcement Stitch” button on the machine.
For the details, please refer to the Operation Manual
included with your machine.
Reinforcement Stitch” button on the machine.
For the details, please refer to the Operation Manual
included with your machine.
Assembling the Controller
a
Align the wide side of the mounting plate with
the notch in the bottom of the main foot
controller, and then secure them together
with a screw.
the notch in the bottom of the main foot
controller, and then secure them together
with a screw.
b
Align the other side of the mounting plate with
the notch on the bottom of the side pedal, and
then secure them together with a screw.
the notch on the bottom of the side pedal, and
then secure them together with a screw.
c
Insert the plug for the side pedal into the jack
at the back of the main foot controller.
at the back of the main foot controller.
d
Insert the round-shaped plug for the main
foot controller into the foot controller jack on
the right side of the machine.
foot controller into the foot controller jack on
the right side of the machine.
e
Open the cover of the external port (
1
) next
to the foot controller jack, and then insert the
square-shaped plug for the main foot
controller into the external port (
square-shaped plug for the main foot
controller into the external port (
2
).
No.
Part name
Part code
1
Main foot controller
XF6470-001
2
Side pedal
XF3217-001
3
Mounting plate
XF3222-001
4
Mounting screw × 2
XF3223-001
Controller
Functions that
can be specified
a
Main foot controller
Start/Stop
b
Heel switch
Select any of the
following:
• Thread Cutting
• Needle Position
UP/DOWN
• Single Stitch
• Reverse Stitch*
(Reinforcement
Stitch)
c
Side pedal
Memo
• If you set “Reverse Stitch” on the side pedal, you
can easily sew darning, using zigzag stitches. With
both feet, keep pressing the main foot controller,
and repeat pressing and releasing the side pedal to
sew forward and reverse in turn. Machine will
reverse at the speed you press the main foot
controller.
both feet, keep pressing the main foot controller,
and repeat pressing and releasing the side pedal to
sew forward and reverse in turn. Machine will
reverse at the speed you press the main foot
controller.