Руководство По Работе для Brother Innov-is 40e
GETTING READY ———————————————————————————————————————————————————————————————————————————————————————————————————————
26
l
Start sewing.
• For details on starting to sew, refer to
• For details on starting to sew, refer to
“Starting to sew” (page 42).
X
Two lines of stitching are sewn parallel
to each other.
to each other.
Note
● When using the twin needle, the stitches
may become bunched together, depending
on the types of thread and fabric that are
used. If this occurs, increase the stitch
length. For details on adjusting the stitch
length, refer to “Adjusting the stitch length
and width” (page 40).
on the types of thread and fabric that are
used. If this occurs, increase the stitch
length. For details on adjusting the stitch
length, refer to “Adjusting the stitch length
and width” (page 40).
CAUTION
● When changing the sewing direction, press
(needle position button) to raise the
needle from the fabric, and then raise the
presser foot lever and turn the fabric.
Otherwise the needle may break or the
machine may be damaged.
presser foot lever and turn the fabric.
Otherwise the needle may break or the
machine may be damaged.
● Do not try turning the fabric with the twin
needle left down in the fabric, otherwise the
needle may break or the machine may be
damaged.
needle may break or the machine may be
damaged.